Select the service that best matches your situation.
How would you like to connect?
Choose your preferred appointment type.
Pick a date & time
Available Monday–Saturday, 9 AM–5 PM.
Where can we reach you?
We’ll confirm your booking within the hour.
Emergency dispatch — we’ll call you within minutes of receiving this.
Thanks — we’ve got it.
We’ll call you within the hour at the number you provided. If this is an emergency, call us directly at (818) 486-6546.
Something went wrong.
We couldn’t send your request. Please call us at (818) 486-6546 — we’re standing by 24/7.
Hero photo
Studio City, CA · Fire Damage · IICRC S700
Fire Damage Restoration in Studio City, CA
Fire damage in Studio City splits into two patterns: structural fires from kitchen, electrical, or appliance origins — the most common single-property loss — and wildfire-zone exposure on the south side of Ventura Boulevard, where properties sit in the Very High Fire Hazard Severity Zone. Each requires the full S700 process, but the scope and the carrier conversation differ. We handle structural fire damage mitigation through full rebuild on one CSLB #1078518 B-General license. IICRC S700 certified. HAZ Certified. Est. 2019.
Smoke penetrates everywhere — walls, HVAC, attic insulation, fabric, drywall. Soot is acidic and continues etching surfaces until professionally cleaned. Smoke damage often outlasts the fire itself by months.
Water damage from extinguishment.
Whatever the fire department used to put the fire out is now soaking into your floors, walls, and basement. Water damage from firefighting creates secondary structural issues and mold risk within 24–48 hours.
We handle all three under one project — IICRC S500 for water damage from extinguishment, IICRC S520 for resulting mold risk, and IICRC standards for fire and smoke restoration throughout.
Fire damage patterns in Studio City:
Kitchen fires.
The most common single-property cause — range, oven, microwave, or dishwasher origin. Smoke and soot spread far beyond the room of origin via HVAC, water damage from suppression efforts compounds the loss, and contents like cabinets, appliances, and soft goods often need pack-out.
Electrical fires.
Aging wiring in 1950s–70s construction, with outlet, panel, or attic ignition points. Often discovered late, with concealed damage inside walls — investigation and repair are required before reconstruction.
Appliance fires.
Dryer lint accumulation, refrigerator compressor faults, washing-machine motors, and garage workshop tools are recurring ignition sources across Studio City homes.
HVAC and chimney fires.
Older systems and deferred maintenance lead to HVAC- and chimney-origin fires that distribute soot throughout the home via ductwork.
Wildfire-zone exposure (south of Ventura, VHFHSZ).
Properties south of Ventura Boulevard sit in the Very High Fire Hazard Severity Zone — ember intrusion through vents, eaves, and attics; heat damage to siding, windows, and landscaping; and smoke and ash entering the interior via HVAC during active burns. The January 2025 Palisades Fire pushed heavy smoke across Studio City for days.
Section 03 · What it includes
Our IICRC S700 process.
A complete fire damage restoration project typically runs through these phases.
Emergency response
Board-up of broken windows, doors, and roof penetrations
Tarp damaged roofing
Secure the property against further loss
Assessment
Identify all smoke- and soot-affected areas — often far beyond the fire origin
Categorize soot type (wet smoke, dry smoke, protein, fuel oil)
Plan contents handling — in-place cleaning vs. pack-out
Document damage for the carrier
Mitigation
Soot removal — different methods per soot type
Surface cleaning of walls, ceilings, floors, and framing
Structural drying if there is water damage from suppression
Odor neutralization — ozone, thermal fogging, or hydroxyl
HVAC cleaning and decontamination
Contents
Pack-out to a controlled environment
Inventory and photograph everything
Clean what is salvageable
Document total-loss items for the carrier
Reconstruction
Demo affected materials
Frame, drywall, electrical, and plumbing as needed
Cabinetry, flooring, and paint
Final walkthrough and contents return
Our process in Studio City: 24/7 dispatch from Woodland Hills HQ, board-up and stabilization, assessment and carrier coordination, contents pack-out if needed, soot and smoke mitigation throughout the structure, structural drying if suppression water is present, odor neutralization, HVAC cleaning, reconstruction on our CSLB #1078518 B-General license, and contents return at the final walkthrough. Typical timeline: 1–2 weeks mitigation, 4–12 weeks reconstruction depending on scope.
Section 04 · One accountable team
One team, from the first board-up to the final walkthrough.
No second contractor, no scope handoff, no scheduling gap between mitigation and rebuild.
Insurance and process.
Fire claims are typically large and complex. We work directly with all major carriers, and documentation is built into every job — photos, inventory, scope of work, and daily progress logs. What you do: call us 24/7, do not enter the property until a structural assessment confirms safety, and we coordinate board-up, mitigation, contents, and carrier communication. Because we hold a CSLB #1078518 B-General Building license, we take the job from emergency board-up through final paint and contents return without subbing out the reconstruction.
Section 05 · Wildfire context
Wildfire context for Studio City.
Studio City sits adjacent to the Santa Monica Mountains corridor — and the south side carries real fire-zone classification.
Properties south of Ventura Boulevard fall in the Very High Fire Hazard Severity Zone (VHFHSZ) — the same fire-risk classification carried by Calabasas, Topanga, and Pacific Palisades hillside areas. The January 2025 Palisades Fire burned the Pacific Palisades, Malibu, Topanga, and Brentwood corridor — close enough that smoke and ash reached Studio City for days. Studio City HVAC systems pulled smoke into homes during the active burn. The Palisades Fire did not directly burn Studio City. We respond to wildfire smoke damage and fire-zone restoration across the Valley.
For properties south of Ventura in VHFHSZ, fire risk is ongoing. Hardening considerations matter: ember-resistant vents, Class A roofing, defensible space. We do fire-zone restoration work and post-fire rebuild — not pre-fire hardening, which is a different scope.
Section 06 · Why Studio City calls us
Why Studio City homeowners call us for fire damage.
One local, licensed team from the emergency call through the rebuild.
The full IICRC S700 process.
Emergency board-up, soot categorization and removal, structural cleaning, odor neutralization, and HVAC decontamination — documented to the S700 standard adjusters require.
One license — mitigation through rebuild.
CSLB #1078518 B-General Building Contractor. We take the job from emergency board-up through final paint and contents return — no subbing out the reconstruction.
Contents pack-out and return.
We inventory and photograph everything, move salvageable items to controlled cleaning, document total-loss items for the carrier, and return restored contents at job completion.
HAZ certified for older homes.
Fire damage can expose asbestos in older drywall, insulation, or pipe wrap on the 1950s–70s construction common in Studio City — we handle those materials safely per protocol.
Fire-zone and VHFHSZ experience.
Properties south of Ventura Boulevard sit in the Very High Fire Hazard Severity Zone. We do fire-zone restoration and post-fire rebuild across the Valley, including wildfire smoke response.
Same-day board-up from Woodland Hills HQ.
We dispatch from our Woodland Hills headquarters, minutes east on the 101. Same-day emergency board-up is standard, with after-hours and weekend response built in.
Section 07 · Cost transparency
What fire restoration costs in Studio City.
Fire damage costs vary enormously by scope. Real ranges for Studio City jobs.
$15,000–50,000
Contained room fire — kitchen or single-appliance origin. Mitigation plus rebuild.
$50,000–150,000+
Multi-room smoke damage with structural fire.
$150,000–500,000+
Major structural fire with significant rebuild.
Total-loss rebuild
Full reconstruction cost on our B-General license.
Insurance handling is critical on fire claims. We document thoroughly and coordinate with adjusters throughout.
Section 08 · Recent work
A recent Studio City fire job.
A representative job — the pattern repeats across fire restoration in Studio City.
Photo
Kitchen fire mitigation through rebuild — Studio City single-family residence.
1970s ranch home, kitchen fire originated at the range, smoke and soot through kitchen, dining, and hallway. Emergency board-up, contents pack-out, soot removal, structural cleaning, drywall and cabinet rebuild, paint, contents return. Coordinated with the carrier through final approval.
Fire is three losses at once — flame, smoke, and water. We handle all three under one team.
Section 09 · Common questions
Frequently asked questions.
The questions we hear most about fire damage in Studio City.
How fast can you get to my Studio City fire damage?
We dispatch from Woodland Hills HQ, minutes east on the 101. Same-day emergency board-up is standard. After-hours and weekend response built in.
Did the Palisades Fire affect Studio City?
The January 2025 Palisades Fire burned the Pacific Palisades, Malibu, Topanga, and Brentwood corridor — it did not directly burn Studio City, but smoke and ash reached the city for days. HVAC systems pulled smoke into homes during the active burn. We respond to wildfire smoke damage and fire-zone restoration across the Valley.
My home is south of Ventura Boulevard — am I in the fire zone?
Most properties south of Ventura Blvd in Studio City fall within the Very High Fire Hazard Severity Zone (VHFHSZ). The classification carries real implications for insurance, hardening requirements, and smoke exposure during regional fire events.
Can you do full rebuild after a fire?
Yes. CSLB #1078518 B-General Building covers full structural reconstruction. We take the job from emergency board-up through final paint and contents return on one license.
What happens to my belongings after a fire?
Contents pack-out is standard for fire claims. We inventory and photograph everything, move salvageable items to controlled cleaning, document total-loss items for the carrier, and return restored contents at job completion.
How long does fire restoration take?
Contained room fire: 4–8 weeks total. Multi-room smoke and structural fire: 3–6 months. Major rebuild: 6–18 months depending on permits and scope.
Will my insurance cover this?
Fire is a covered peril on standard property policies. Coverage limits and additional living expense (ALE) for displacement are typically included. We document thoroughly to support the claim.
Do you handle the smoke odor?
Yes — odor neutralization is part of S700 protocol. Ozone treatment, thermal fogging, or hydroxyl depending on situation. HVAC cleaning is included to prevent re-contamination through ductwork.
We run fire damage restoration across the Valley under one license — mitigation through rebuild. Click into a nearby city for its fastest local response.
24/7 fire damage emergency dispatch from our Woodland Hills HQ, minutes east on the 101. Call Instant Restoration for emergency board-up, full mitigation, and complete reconstruction under one license — we mitigate and rebuild from the first board-up through final paint and contents return. Free on-site assessment. CSLB #1078518 · IICRC S700 · HAZ Certified · Est. 2019.